ESP-32F development board wifi Bluetooth Kit control module With TFT LCD
Type: WiFi + Bluetooth
Material: PBC card
Product Dimensions: 69.2 * 60.3mm (2.72 * 2.37inch)
Mounting hole distance: 56.8 * 48.4 mm (2.24 * 1.9 inches)
ESP32 uses two Xtensa LX6 CPUs of Harvard architecture to form a dual-core system. All on-chip memory, off-chip memory and peripherals are distributed via the data bus and / or the instruction bus of both CPUs.
ESP32 is the industry-leading integrated Wi-Fi + Bluetooth solution with only 16 external components and integrated antenna switch, RF balun, power amplifier, low noise amplifier, filter, power management module and advanced auto-tuning. notably the area of the printed circuit board (PCB).
1.44 inch TFT LCD display module:
The breakout has a welded TFT display (uses a gentle flex-circuit connector) and a very low 3.3V dispersion regulator and a 3 / 5V level shifter so you can use it with a 3.3V or 5V power supply and TTL control logic.
Resolution: 128 (H) RGB * 128 (V) points
The TFT driver is ST7735
Supports the generic single-chip microcomputer Arduino / 51 / SMT32 etc.
Control of the SPI interface
Arrangement of colors: active TFT matrix
Only 4 IO to drive
1. On board the stable CP2102 chip from USB to TTL to ensure normal communication between serial ports.
2. Supports automatic download, without manually changing the download and execution mode.
3. Technology of sinking gold
4. Support WiFi + Bluetooth
5. On board 1.44 inch TFT
6. With the 1W speaker, you can play PCM music.