SCHEDA PRO MINI 5V / 16MHz ATMEGA328P ARDUINO COMPATIBILE

SCHEDA PRO MINI 5V / 16MHz ATMEGA328P ARDUINO COMPATIBILE

More details

ARD004
New product

3,48 €

- +

Add to compare

Free Google QRcode module

 
More info

SCHEDA PRO MINI 5V / 16MHz ATMEGA328P ARDUINO COMPATIBILE

This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board. 

We really wanted to minimize the cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.

The boards have 14 digital input/output pins (of which 6 can be used as PWM outputs). The boards also have 6 analog inputs, a battery power jack, a power switch, a reset button, holes for mounting a power jack, an ICSP header, and pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.

The brand new Arduino Pro Mini 5V / 16MHz ATMEGA328P Interactive media Controller for robots.

MicrocontrollerATmega328
Operating Voltage3.3V or 5V (depending on model)
Input Voltage3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
Digital I/O Pins14 (of which 6 provide PWM output)
Analog Input Pins8
DC Current per I/O Pin40 mA
Flash Memory32 KB (of which 2 KB used by bootloader)
SRAM2 KB
EEPROM1 KB
Clock Speed8 MHz (3.3V model) or 16 MHz (5V model)

Package included:

  • 1 x Arduino Pro Mini 5V / 16MHz ATMEGA328P Interactive media Controller
  • 1 x USB Line
 

Write a review

Write a review

 
Comments(0)
07/19/2017
Feedback ricevuto nel nostro negozio eBay http://stores.ebay.it/circuitointegrato

Tutto perfetto..grazie

  • Was this comment useful to you?
  • (0) (0)
Compare 0

No products

To be determined Shipping
0,00 € Total

Check out